Bioresource Polymer Composite for Energy Generation and Storage: Developments and Trends.

The ever-growing demand of human society for clean and reliable energy sources spurred a substantial academic interest in exploring the potential of biological resources for developing energy generation and storage systems. As a result, alternative energy sources are needed in populous developing countries to compensate for energy deficits in an environmentally sustainable manner. This review aims to evaluate and summarize the recent progress in bio-based polymer composites (PCs) for energy generation and storage. The articulated review provides an overview of energy storage systems, e. g., supercapacitors and batteries, and discusses the future possibilities of various solar cells (SCs), using both past research progress and possible future developments as a basis for discussion. These studies examine systematic and sequential advances in different generations of SCs. Developing novel PCs that are efficient, stable, and cost-effective is of utmost importance. In addition, the current state of high-performance equipment for each of the technologies is evaluated in detail. We also discuss the prospects, future trends, and opportunities regarding using bioresources for energy generation and storage, as well as the development of low-cost and efficient PCs for SCs.

Novel N-doped carbon dots derived from citric acid and urea: fluorescent sensing for determination of metronidazole and cytotoxicity studies.

Blue emitting nitrogen-doped carbon dots were synthesized using citric acid and urea through the hydrothermal method, and the fluorescence quantum yield was 35.08%. We discovered that N-CDs featured excellent robust fluorescence stability and chemical resistance. For metronidazole detection, our N-CDs exhibited quick response time, high selectivity and sensitivity, and low cytotoxicity. Specifically, our N-CDs could detect metronidazole in the linear range of 0-179 µM, and the LOD was 0.25 µM. Furthermore, metronidazole efficaciously quenches the fluorescence of N-CDs, possibly owing to the inner filter effect. Lastly, we have employed our N-CDs to detect metronidazole in commercial metronidazole tablets with high accuracy. Overall, the newly prepared fluorescence sensor, N-CDs, demonstrated a huge potential to detect metronidazole in a simple, efficient, sensitive, and rapid manner.

Relationship between Characteristics of the Wound and Healing Duration among Patients Treated during Home-Visits.

In humans, wound healing is a vital but complex process governed by chronological yet overlapping stages, such as hemostasis, inflammation, proliferation, and remodeling. Because of the complexities of wound healing, it is prone to pausing at multiple levels. Wound healing can potentially be influenced by factors that affect cellular functions and physiologic responses. This research aimed to investigate the relationship between wound healing duration and demographic properties and characteristics of wounds among patients treated during home visits in Erbil, Iraq. To this end, a longitudinal correlational quantitative design was employed in the current study. A random sample of about 101 chronic wounds was found in 77 patients of both genders selected from all ages during home visits for around four years in Erbil. The professional nurse applied nursing management according to the nursing plan during home visits until the wound recovered. The total duration of wound healing was calculated and documented for each wound. Seventy-seven patients participated in the current study, with their mean±SD age being 58.02±16.29 years, ranging from 19 to 89. The median age was 60. More than half of the sample (54.5%) were ≥60 years, and 62.3% were males. Less than one-third of patients (31.2%) were of normal weight, 93.5% were married, 37.7% were housewives, and 35.1% were illiterate. Regarding the duration of wound healing, in more than one quarter (26.7%), it was delayed (took more than three months for healing). The longest mean healing time (20.06 weeks) was for pressure ulcers (P<0.001), which was significantly higher than all the mean healing times of other types of wounds. The study showed a significant (P=0.011) association between the mean healing time and the anatomic location of wounds, revealing that the highest mean healing time was for wounds located in the trochanteric area (21.10 weeks) or the sacrum (18.25 weeks). A significant association (P=0.002) was also detected between the mean healing time and the edge of the wound, with the highest mean healing time (18.64 weeks) found in wounds with undermined edges. Furthermore, the mean healing time was significantly higher among those with infected wounds (14.59 weeks) than the mean (6.50 weeks) among those with no infection (P<0.001). In conclusion, wound healing progression is an important but complicated process that healthcare providers use for patients during home visits. It is divided into phases, including hemostasis, inflammation, proliferation, and remodeling. The current study revealed that the healing time was affected by the anatomical site of the wound and took longer in pressure ulcers, undermined edge wounds, and infected wounds.

Synthesis and Characterization of Eco-Friendly Bio-Composite from Fenugreek as a Natural Resource.

The present study show the usability of starch (tamarind) based-bio-composite film reinforced by fenugreek by various percentages to replace the traditional petrochemical plastics. The prepared bio-composite films were systematically characterized using the universal testing machine (UTM), soil degradation, scanning electron microscope (SEM), X-ray diffraction (XRD), thermogravimetric analyzer (TGA), and antibacterial tests. The experiments showed that a lower percentage of fenugreek improves biodegradation and mechanical strength. More than 60% of biodegradation occurred in only 30 days. Almost 3 N/mm2 tensile strength and 6.5% tensile strain were obtained. The presence of micropores confirmed by SEM images may accelerate the biodegradation process. Antibacterial activity was observed with two samples of synthesized bio-composite, due to photoactive compounds confirmed by FTIR spectra. The glass transition temperature was shown to be higher than the room temperature, with the help of thermal analysis. The prepared bio-composite containing 5% and 10% fenugreek showed antibacterial activities.

Green Production and Interaction of Carboxylated CNTs/Biogenic ZnO Composite for Antibacterial Activity.

Using biomolecule-rich plant extracts, the conversion of metal ions to metal oxide nanoparticles via abiogenic approach is highly intriguing, environmentally friendly, and quick. The inherent inclination of plant extracts function as capping agents in the insitu synthesis. In this study, biogenic zinc oxide nanoparticles (ZnO-NPs) were synthesized using an aqueous leaf extract from Moringaoleifera. The ZnO-NPs were then mixed with carboxylated carbon nanotubes (CNTs) to create a carboxylated CNTs/biogenic ZnO composite using asol-gel method. The CNTs/ZnO composite displayed 18 mm, 16 mm, and 17 mm zones of inhibition (ZOI) against Bacillus cereus, Pseudomonas aeruginosa, and Escherichia coli, respectively. In contrast with ZnO-NPs, the produced carboxylated CNTs/ZnO composite demonstrated a 13 percent elevation in ZOI as antibacterial activity against Bacillus cereus ATCC 19659, Escherichia coli ATCC 25922, and Pseudomonas aeruginosa ATCC 27853. The characterization of ZnO-NPs and the carboxylated CNTs/ZnO composite were performed via FTIR, UV/Vis spectroscopy, SEM, and XRD. The XRD pattern depicted a nano-sized crystalline structure (Wurtzite) of ZnO-NPs and a carboxylated CNTs/ZnO composite. The current work comprehends a valuable green technique for killing pathogenic bacteria, and gives fresh insights into the manufacture of metal oxide composites for future research.